Electrical work costs in Phoenix (2026)
Updated June 2026
Small electrical jobs in the Phoenix area usually run a couple hundred dollars, while bigger projects like a panel upgrade, EV charger, or whole-home rewire run into the thousands. What you pay comes down to the scope, how easy the wiring is to reach, and the permit and inspection a job requires. Below are 2026 Phoenix-area ranges by job type, with the cost drivers behind them. For an exact figure, get a few free quotes from local pros.
Service call and hourly rates
Most Valley electricians charge a service or trip fee of roughly $75 to $150, and hourly labor commonly runs $50 to $130, though many jobs are quoted as flat rates. Small tasks land in predictable ranges: installing an outlet or switch is about $100 to $300, a ceiling fan $150 to $350, and recessed lights roughly $100 to $250 per fixture installed. A whole-home safety inspection runs about $150 to $300.
Panel upgrade (100A to 200A)
Upgrading a main panel to 200 amps typically costs $1,500 to $3,500 in the Phoenix area, and can reach $4,000 or more when the meter, service mast, or grounding also needs work, or when the utility connection is awkward. The price includes the permit, the utility coordination, the new panel and breakers, re-landing the circuits, and inspection. A simple breaker replacement, by contrast, is usually just $150 to $300.
EV charger installation
Installing a Level 2 home charger usually runs $500 to $2,000 for the electrical work, plus $200 to $700 for the charger unit itself. The low end is a short run to a panel with spare capacity; the high end involves a long conduit run, a subpanel, or a panel upgrade to make room for the 40 to 50 amp circuit. Because EV demand is climbing in the Valley, this is one of the most common upgrades electricians do here.
Whole-home rewiring
Rewiring an entire house is the big-ticket job, commonly $8,000 to $20,000 or more depending on size, or roughly $3 to $8 per square foot. It is usually reserved for older homes with cloth or aluminum wiring, ungrounded outlets, or repeated problems. Opening and patching drywall is a real part of the cost, so two-story homes and finished walls push the number up. For most homes a targeted fix or a panel upgrade is enough; a full rewire is the exception, not the rule.
Frequently asked questions
How much does an electrician cost in Phoenix?
Most small jobs land between $150 and $400, with a typical service fee of $75 to $150 plus labor around $50 to $130 an hour (many jobs are flat-rated). Larger projects like a panel upgrade, EV charger, or rewire run into the thousands.
How much is a panel upgrade in Phoenix?
A 100-to-200-amp upgrade usually runs $1,500 to $3,500, up to $4,000 or more if the meter, mast, or grounding also needs work. The price covers the permit, utility coordination, the new panel, and inspection.
What does it cost to install an EV charger?
Plan on $500 to $2,000 for the electrical work plus $200 to $700 for the charger. A short run to a panel with spare capacity is cheapest; a long run, a subpanel, or a needed panel upgrade pushes it higher.
Is whole-home rewiring worth it?
For an older home with cloth, aluminum, or ungrounded wiring and recurring problems, yes, it is a safety upgrade. It runs about $8,000 to $20,000 or more. For most homes, a targeted repair or a panel upgrade solves the issue at a fraction of the cost.