Concrete and masonry costs in Phoenix (2026)

Updated July 2026

Concrete and masonry pricing depends heavily on what you are building: a plain patio slab, decorative stamped concrete, or a block wall are three different jobs with three different price points. Below are 2026-era ranges by job type. For an exact figure, get a few free quotes from local pros.

Concrete patios and slabs

A basic poured concrete patio or slab in the Phoenix area runs about $4 to $12 per square foot installed, with most homeowners spending around $1,936 total (commonly $1,049 to $2,832) for a typical patio-sized pour. Budget an extra roughly 8% for Phoenix-area sales tax on top of the project total, and expect $500 to $2,000 more if the site has significant caliche (a hard, cemented soil layer common in the Valley) that needs extra excavation.

Stamped and decorative concrete

Stamped or decorative concrete (patterned to look like pavers, stone, or brick) in the Phoenix area runs about $5 to $30 per square foot, with most homeowners spending around $2,268 total (commonly $1,518 to $3,112). In Phoenix, decorative concrete is popular for backyard patios and pool decks since it holds up to sun and heat better than some paver systems. Local permit costs for a stamped concrete project typically run $100 to $300 on top of the installation price.

Block and masonry walls

Block wall construction, the more common masonry job in the Valley, runs roughly $45 to $125 per linear foot installed, with height, finish (painted or stuccoed), and footing requirements driving the range. See our fencing guide for the full block wall cost breakdown, since wall and fence pricing overlap in this market.

Frequently asked questions